Image of Pendant Light Conversion Kit

Pendant Light Conversion Kit

Published On August 10, 2018 | By admin | Lighting Ideas

Converting an accessory ceiling pendant light conversion kit to a receptacle is as simple as removing a few screws and make a connection wiring basic electric. You can use the same electrical cables that feed the reservoir that feeds the lamp. In many cases, you may even be able to mount the receptacle in the electrical box lamp. However, a case may require replacement. Instructions, Lamp off in the fuse box. Place a ladder under the lamp.

Image of Pendant Light Conversion Kit

Image of Pendant Light Conversion Kit

Remove the screws that hold the pendant light conversion kit to the electrical box using a Phillips screwdriver. Carefully lower the lamp to expose the electrical cables. Twist the wire nuts counterclockwise to loosen the cable connections. Separate cables lamp power supply and place the lamp in a safe place.

12 Photos Gallery of: Pendant Light Conversion Kit

Image of: Image of Pendant Light Conversion Kit

Image of: Modern Pendant Light Conversion Kit

Image of: New Pendant Light Conversion Kit

Image of: Original Pendant Light Conversion Kit

Image of: Pendant Light Conversion Kit Design

Image of: Pendant Light Conversion Kit Gallery

Image of: Pendant Light Conversion Kit Ideas

Image of: Pendant Light Conversion Kit Image

Image of: Pendant Light Conversion Kit Picture

Image of: Pendant Light Conversion Kit Style

Image of: Rustic Pendant Light Conversion Kit

Image of: Top Pendant Light Conversion Kit

Related :  How to Paint Brass Chandelier

Pendant light conversion kit, Hold the new receptacle in the electrical box in the ceiling. If the socket screw holes align with the screw holes of the electrical box, you can use it. However, if the holes are not aligned, you have to replace the electrical box. Remove the screws holding the electrical box nearby roof beam using a drill and a Phillips driving. Remove the electrical box in the ceiling.

Comments are closed.